黑龙江钢管内壁除锈设备

黑龙江钢管内壁除锈设备的作业原理

钢管内壁抛丸设备是使用高速旋转抛丸轮将抛丸颗粒喷向钢管表里外表，从而去除外表氧化物、铁锈、尘垢，一起构成必定的外表粗糙度，进步钢管的外表质量和粗糙度，增强钢管的耐腐蚀性和附着力。

黑龙江钢管内壁除锈设备的作业步骤
1.钢管放置在内壁黑龙江抛丸机的定位架上，内壁喷枪放置在钢管内部。
2.启动抛丸机，旋转内壁喷枪和抛丸轮开始高速旋转，产生离心力，将抛丸颗粒喷向钢管表里表。
3.抛丸颗粒冲击钢管表里表，铲除外表尘垢和氧化物，构成必定的外表粗糙度。
4.钢管内壁经抛丸清理后，从机器出口取出，进行后续涂装或其他处理。
5.简而言之，钢管表里壁抛丸机是使用抛丸颗粒对钢管表里外表进行冲击和摩擦，以达到清洗和外表处理的效果。

Working principle of rust removal equipment for steel pipe inner wall

The steel pipe inner wall shot blasting equipment uses a high-speed rotating shot blasting wheel to spray shot blasting particles onto the surface of the steel pipe, thereby removing surface oxides, rust, and dust, forming a certain surface roughness, improving the surface quality and roughness of the steel pipe, and enhancing the corrosion resistance and adhesion of the steel pipe.

Operation steps for rust removal equipment on the inner wall of steel pipes

1. Place the steel pipe on the positioning frame of the inner wall shot blasting machine, and place the inner wall spray gun inside the steel pipe.

2. Start the shot blasting machine, rotate the inner wall spray gun and shot blasting wheel to start high-speed rotation, generate centrifugal force, and spray the shot blasting particles towards the inner surface of the steel pipe.

3. Shot blasting particles impact the inner and outer surfaces of the steel pipe to remove dust and oxides, forming a certain surface roughness.

4. After the inner wall of the steel pipe is shot blasted and cleaned, it is taken out of the machine outlet for subsequent coating or other treatment.

In short, the steel pipe surface and inner wall shot blasting machine uses shot blasting particles to impact and friction the surface of the steel pipe surface, in order to achieve the effect of cleaning and surface treatment.